Mamba3D 3D-Printer V2.0 with Heated Bed and Auto Bed Levelling


Out Of Stock
Product Code:
Mamba3D Printer- Kit v2.0

Not yet rated
Write a review

Available Options


The Mamba3D Printer v2.0 now includes a heated bed and auto bed levelling. With the heated bed you are able to print a wide variety of materials like:

  • PLA
  • ABS
  • Nylon
  • HIPS

The printer also comes with an Auto Bed Levelling Sensor. No need for adjusting the print build platform anymore.

Do a one-time calibration and it is set to print.

The Mamba3D printer is an affordable, high quality, all-metal, open source 3D-printer with a 200x200x200mm build area. You get the complete kit to build your own Mamba3D. The complete kit comes with a detailed step-by-step assembly manual. Common assembly time is between 4-5 hours. All wires have pre-crimped connectors, no need to solder, just plug in the connectors.

The Mamba3D printer kit contains:

  • Aluminum frame and plates
  • Electronics with preloaded firmware
  • SD-Card support
  • Motors and wires (no soldering needed)
  • Mamba3D extruder drive
  • Hot-end, temperature up to 300°C
  • Power supply (100-240V AC)
  • All other hardware needed to assemble your own printer
  • USB cable
  • Detailed construction manual
  • Heated Bed
  • Auto Levelling Sensor

Estimated shipping time: 4-5 days

Unleash your creativity
3D-printing brings your creativity to life. Print your ideas directly at your desk and hold them in your hands. The Mamba3D printer is
ultimately suited for prototyping, testing and making unique products.

A high quality 3D-printer
The Mamba3D printer consists of a robust aluminum frame and has a large build area. The precision 0.4mm nozzle prints at a layer resolution of up to 50 microns and the pushback system on the direct drive extruder allows changing the filament easily. 

All Metal
The printer is built-up mostly out of metal parts. The frame is constructed out of black anodized aluminium profile. All the sheet-metal is blank anodized aluminium. By using all metal parts we achieved to get you a durable, robuust and rigid printer which you can enjoy for a long time.

Extruder System
For the extruder direct drive system, we engineered a custom easy release system. With this system you can change filament in just a matter of seconds. Simply pull the lever, swap filament and start printing: A big plus compared to other direct drive systems.

The hot-end is completely produced in metal. This way you can reach high temperatures if needed. The hot-end type is a proven technology and is used in many applications already. Together with the complete construction of the Mamba3D capable of producing high quality prints.

The electronics is a single circuit board with integrated stepper drives. The electronics are prepared for any future upgrades like adding a display, SD-card capability and a heated bed to your printer. Standard connectors are provided for easy assembly of all electronics on the printer.

Why you should get the Mamba3D printer

  • Most other 3D-printers are constructed out of plastic parts. These parts tend to break after a while. The Mamba3D printer uses metal parts. By using metal parts the printer is rigid, durable and can achieve high accuracy and precision.
  • Changing filament on a 3D-printer can be a hassle. With our extruder drive, filament change is done in seconds.
  • Compared to other printers, especially in the same price range, the Mamba3D printer produces higher quality 3D-printed objects.
  • The Mamba3D printer is open source. Upgrades and add-ons designed by us and our users can easily be added in the future.
  • The printing speeds of the Mamba3D printer are high, up to 150mm/s printing speed and 300 mm/s travel speed.
  • Because we love to get you on board and are looking foward to hear about your experience and all the great things you print with your Mamba3D printer.

For more information visit the Mamba3D printer product site here

For countries outside the EU prices are without VAT/TAX,
however local TAX and (import) duties may apply.


Creative Commons License
Mamba3D by is licensed under a Creative Commons Attribution-NonCommercial-NoDerivs 3.0 Unported License.


Frame Anodized aluminum
Extruder All metal, Temperatures up to 300 degrees Celcius
Build Volume (WxDxH) 200mm x 200mm x 200mm (7.87x7.87x7.87 inch)
Filament 1.75mm
Layer Resolution up to 50 microns
Nozzle 0.4mm
Speed Print speed up to 150mm/s, Travel speed up to 300 mm/s
Power 110-240 VAC Power adapter
Software Repetier with Slic3r implemented
Firmware Marlin

Reviews (0)

Write a review

Note: HTML is not translated!

Bad            Good


Company info

MyMatics started in 2012 in The Netherlands and has a focus on new technologies. The tremendous advancements made in the 3D-printing area have intrigued us for several years. We are passionate about 3D-printing and we are convinced 3D-printing will change our everyday life. Making this technology available for everybody is our challenge now.

Contact Us